7 mins all as per package.
A 30 second pre water bath soak was given.

Results - yikes thin thin thin.

An easy way to quickly find a different development time is to do a drastic change. Now it’s much easier to narrow which direction to go more or less time.

The next WD2D developer batch was mixed 300 ml H2O (water0
15 ml Stock A
15 ml Stock B
To get the stock: 300 / 20 = 15

Results - bang very pretty.
A 1 min pre water bath soak

T Max 400

Used a fresh batch of the 300 ml h2o developer mix.

Remember each film is developed in it’s own freshly mixed developer.

Did a full 2 min soak and 7 min development.

Looked thin and the next development was full 2 min soak and 9 min development.

I did two more Delta 100 4×5 films which were no good. Exposure was off and my left focus was off. Must of moved the back of the camera while loading the film.

Going to do some density readings and see what they give.

My strong (bright) high lites seem to be still blocking up. Maybe weaken it out a little and extend development. Will see what today brings. I have some long development times.

Technorati Tags: WD2D, different development time, WD2D developer, Delta 100, 4×5 films, development

Water bath soak.

This is to have the negative evenly soaked in water allowing the developer to evenly go across the film when placed in the developer.

Wear gloves.

Then stop bath. Which will be my old standard regular table vineger mixed with water.

Water bath to Fixer one then fixer two.

Fixer is Forumlary Rapid Fix with out the harder and the smell. Boric Acid and Soduim bisufate. Used at 1:3.

Then water one to water two bath to full washing.

Times after the test.

The exposures were from 1/4 of a second to 3 mins. It will be interesting.

It’s been cloudy and very windy.

Technorati Tags: develoment, Delta 100, T Max, WD2D, film, stop bath, Rapid Fix

Wind vibration is always a problem as my exposures are quite long because of a high number f stop used. A weaker longer development helps bring out all of the little tones in the image with out blocking the highlights.

And even then the highlights can still be overly dense, lacking any detail. Sky to land. Snow to land. Ice to Sky. Or the greys are just grey with no ump.

I’m wondering what results will come from these two developers with Delta 100 film.

Wimberley’s WD2D
DI#13 t-Max 100 Extreme N-Developer

Both developers are over a year old. Stored in packaging and plastic bags. “Ouch”.

Try to always store your darkroom film developing chemicals in glass. Plastic bags I find breath well. This means air and chemicals will pass through the bag over the days and months deteriorating the strength (power) of the chemicals when used.

Cheers

Jimmy MacDonald

P.S. I’ve got the blogs pretty well done.
It was a big learning curve. But then putting up three blogs at the same time maybe a bit much.(grin)

What saved the day were simple how to videos. Taking you step by step by focusing you on one or two topics at a time. And it’s easy to see over and over again.

Click… Check it out
Wordpress Blog How To Videos

Technorati Tags: exposures, longer development, Delta 100 film, darkroom, Jimmy MacDonald, blogs, how to videos